Watch out for your legs! Amazing antique power saw. Amador County Fair.
Small Glass Bottles With Corks Grand Sale Cheaper Singing Machine Karaoke Machine Cheep Rca Dvd Vhs Recorder
Friday, December 30, 2011
Monday, December 26, 2011
Synthetic Motor Oil - Is it Better Than Natural Motor Oil?
Natural motor oil is made from crude oil, also known as petroleum. Synthetic oil is made, or synthesized, artificially. The first research to find lubricants that could replace natural oils was done in the late 1930s and the early 1940s, both in Germany and US. There are several types, both totally synthetic oils and semi-synthetic oils that are blends of natural mineral oil and synthetic oil. Synthetic motor oils are, just as the natural motor oils, hydrocarbon composites, so you can always use synthetic oil if you want the best lubricant possible. This also means you can mix them if you want to.
So why would you want to use synthetic motor oil? Its viscosity performance is much better than that of natural oil, leading to less mechanical wear and better overall performance. It provides better lubrication on cold starts, and is more stable than natural oil. This, in addition to less loss of vapor while you drive, contributes to less mechanical wear, which again means that the engine will last longer. It also means that the oil don't have to be changed as often as natural oil, so there will be less oil waste to the benefit of both the environment and the car owners finances. To further improve the environment and the personal economy, using synthetic motor oil will mean a more efficient use of fuel for some cars and engines. If you are going to do high speed driving or drive for an extended period of time in extreme heat, synthetic oil works much better than natural oil. It will also give better engine performance for heavy loads.
There are some disadvantages with synthetic motor oil. Firstly, it is often more expensive than natural oil. The lower friction used to be a problem in some situations, as it couldn't be used for the first runs with a vehicle because friction was desired to cause proper wear and tear. This is no longer a problem, as engines continuously get better made cars often come with synthetic motor oil from the factory. For normal driving the advantages aren't as big as for more extreme conditions, for normal city-driving somewhere without extreme temperatures you might not notice a big difference. But as it is as good as the natural one, synthetic motor oil will be a safe bet in many cases.
Great Deals Dual Compound Miter Saws Dewalt Dc9071 This Instant Shopping Lightweight Mountaineering Boots
Tuesday, December 20, 2011
A agglomeration of 2 acclamation active at once.
Weedeaters, chainsaws, & a leaf blower. Filmed on 6/18/09.
Brita Water Filtration Pitcher Guide Last Minute Foofa Yo Gabba Gabba
Wednesday, December 14, 2011
Antique Tools
Man in history, although much more primitive than those who live today, used his brain and made implements and devices which would help him to survive. He had to have food to live and he had to defend himself from wild animals which roamed the forests. He had his bare hands, but a hand can only do certain number of things; and although it is quite useful for delicate operations like picking out thorns and splinters, it is useless for cutting up meat or skinning animals. Something else had to be found and man invented tools.
The simplest tool which man used was a stone. A stone of the right shape and weight could be used to club animal to death, to hack lumps of flesh from it or to break open nuts and shells. The easiest way of getting such a stone was to look for it. Another way which also improved the shape was to chip or grind the stone with a harder one.
The best stone for making tools was flint. These tools made by primitive man are called hand-axes now. They are thought to have been used in all kinds of way such as for chopping and cutting wood, for digging and even as weapons.
It was a short step from holding the axe in the hand to fitting a handle to it. This gave the blow much more force and so made it easier to cut wood or break open heads. Long flints were fixed to wooden handles. If the handles were long, they had spears, short handles made knives.
Gradually stone way replace by metal. All antique tools are the product of primitive tools. Planes, saws and chisels are all antique tools developed by carpenters over many centuries. Each one got its shape and size by a gradual evolution. What we use is the modern version of these antique tools.
Carpenters have to do other things with the wood apart from cutting it. Drills and awls make a neat hole and the earliest was a twisted round a sharp twig. The string turned the drill first clockwise and then anti-clockwise. This has now been replaced by a rotating handle which drives the borer or hit through gears. Antique tools were very important devices. It was used very accurately and properly to get the work done. The development of primitive tools to antique tools the recent machine tools has taken the evolution from stone hand-axes to power tools one step further.
Saturday, December 10, 2011
Makita Radio Systems - What Makes Them So Good?
Ever notice how almost any construction site tends to have a Makita radio playing tunes on the jobsite? I guess this is not surprising, when you take into account the quality of ALL of the Makita tools. But why is are their radios so good, and why have they become so popular among construction workers? Well, first of all, there is the convenience factor. They can be plugged into either an AC outlet (or extension cord), or they can run off of virtually ANY Makita battery, which are used for many of the other cordless devices (drills, saws, flash lights, and so on).
Another great thing that the Makita radio systems have going for them is the fact that they are extremely loud, making it easy to hear them while working outdoors. Considering how loud that most busy construction sites are, it is worth a lot to have a radio that is loud enough to hear clearly over all of the noise and the chaos surrounding the work zone. And these Makita job site radios do not sacrifice sound quality for loudness either; they offer exception sound quality and clarity. They easily pick up the popular AM and FM radio stations, even when the weather is less than pleasant. They even offer a good amount of rain resistance as well, for when the weather gets rough. When you go with a Makita radio, you will never have to run and put it under cover every single time it starts to rain, which can get very annoying very quickly, especially if you work in states that get a great deal of rain and thunder storms.
Last buy certainly not least, is the fact that the Makita radios are extremely rugged and durable, just like any of the Makita tools. They are reasonably small and compact, but offer amazing durability, and are actually quite hard to damage. Dropping them is not going to phase them much, if at all. And they are very easy to carry around, so you probably will not have to worry about dropping them anyways. But we all know that accidents happen, and that most construction or work zones are prone to things getting bumped and beaten around, but with these amazingly durable radios, you wont even have to worry about these things for the most part, within reason.
Basically the only downfall to a Makita jobsite radio is the price, which is usually around 0 and up in most stores. However, the quality that you get make sit well worth it, and in the long run it is certainly a worthwhile investment, especially when compared to a cheaper radio that is never going to hold up in the construction business. So wouldn't you rather dish out a little more cash and invest in a quality piece of equipment that will stand the test of time in your busy construction industry? It seems like a pretty easy decision, and you will certainly not regret purchasing one of these Makita job site radios.
Thursday, December 8, 2011
Bring A Unique Touch To Your Music Room With Music Wall Art
Jazz wall art and music note art can be used as perfect home accents for anyone who loves music. They can greatly complement other music wall decor. Or if by any chance you have a media room or an area inside the house that you use as an expression for your passion for music, adding these accessories can ultimately increase its sense of style. Along with jazz wall art and music note art, there are several ideas you can make as reference to start your own music design concept for your home.
The rule of thumb when decorating a music or a media room is always consider the walls first. Plan your design by making the wall as the focal point. Since the wall represents the largest area, you must think of unique ideas on how to make the walls stylish and inviting at the same time. You should also need to place comfortable furniture in the room like sofas, music chairs, and carpets. Music note art and vinyl lettering are excellent accessories to highlight your walls.
To make your music room even more interesting, try to purchase antique and second-hand instruments. You can also try jazz wall art and music note art that features famous recording artists, bands and pop icons. Valuable signed collector's item can dramatically enhance the value of the entire wall. To acquire these items you can visit online auction sites and join the bid. If you get lucky you can actually get collector's item at a very affordable price.
Hanging music note art, a frame and a phrase of your favorite song can also accentuate your walls in a more personal way. However, if you are currently on a tight budget, you don't have to buy all these things in one go. You can start with a music note art, a music wall decor or a music wall art. You can then start to build your collection from here.
Lastly, you can also choose a distinct concept for the entire room. You can either choose contemporary, traditional, or country themes. Having a theme will make the decorating process easier since you can narrow down your choices of music wall art and music wall decor to that particular theme only.
To know more decorating ideas for your media or music room, you can visit online sites that offer actual interior design services or catalogs for you to choose. Have fun!
Saturday, December 3, 2011
Wednesday, November 30, 2011
Dovetails - A Clue for Dating Antiques
Dovetail joints often hold two boards together in a box or drawer, almost like interlocking the fingertips of your hands. As the dovetail joint evolved through the last one hundred thirty years, it becomes a clue for the age and authenticity of antique furniture. The type of dovetailed joint, especially in drawers, reveals much about furniture construction and dating. With just a little study of these examples, it is easy to spot true hand made construction vs. machine made furniture.
The name "dovetail" comes from the appearance of the joint, resembling the triangle shape of a bird's tail. The earliest examples are from furniture placed with mummies in Egypt thousands of years ago, and also in the burials of ancient Chinese emperors.
For thousands of years, a dovetail joint was created by a skilled cabinetmaker using small, precision saws and wood chisels. Tiny angled saw cuts were followed by careful cutting by a sharpened chisel on both sides to avoid splintering. One board had tiny "tails," and the other had the larger "pins," carefully measured to match and fit together exactly. When the joint is expertly executed, it is a thing of beauty, and a secure joining of two boards that can last for centuries. A little glue cements the connection, and a good dovetail joint has great strength and durability.
Hand cut dovetails were used to hold the sides of drawers together, but also to join the structural members of case furniture. Hand made screws and nails were relatively expensive and could rust and expand, sometimes cracking the wood they secured. Glues of the period sometimes weakened. Dovetails have great strength, holding pieces of wood in perfect alignment over long periods of time. Simpler country furniture often had larger dovetails, or even a single tail and pin.
Genuine hand-made dovetails like these were the standard of good furniture craftsmanship until about 1870, when American ingenuity developed the "pin and cove" or round style dovetail, often seen on late Victorian and Eastlake furniture. These were cut with a jig or pattern, and an apprentice could create a very well fitting and attractive joint. Popular here into the 1890's, these joints never gained acceptance outside of the U.S. and Canada. European cabinetmakers continued their hand-cut dovetails well into the 1900's.
The next technological development in joinery was again American. In the 1890's, American furniture began to be mass produced, with interchangeable parts and speedy production for the growing and affluent middle class. The slow and laborious crafting and carving, one piece at a time, by a master woodworker was not suited to the new mass market. Steam power, transferred by pulleys and leather belts, operated saws, carving machines and routers that could copy an original pattern exactly.
These routers were ancestors of the electric precision tools of today, and could be used to rapidly cut a machined dovetail joint. Each cut is exactly like the others, each "tail" and "pin" are exactly matched. A close inspection shows no irregular saw cuts or variation from a skilled craftsman, but rather a precise and identical manufactured machined joint. These machine-cut dovetails are as strong and long lasting as the hand-made joints, and became the standard of better American furniture ever since the late 1890's. Other drawer joints include sliding keyhole or French dovetails that were have been used since the 1890's.
European cabinetmakers continued to produce hand-cut dovetails through the 1930's. Electric power tools, like routers and various types of saws were put into widespread use after World War II in the 1940's. There was resistance - in England, carpenters unions went on strike over the use of electric saws, fearing the end of their livelihoods. Nevertheless, by the 1950's, power tools were used in almost all furniture construction across Great Britain.
The use of hand tools and hand-cut dovetails is now the province of hobbyists and a few small shops creating authentic replicas of antique furniture. This overview of the dovetailing techniques should easily help identification and dating of most furniture from the last 200 years.
Great Deals Cd Turntables Fisher Price Precious Planet Swing Sale Off
Friday, November 25, 2011
Creating Inspiring Mosaic Tile Craft Designs
It is possible to create some inspiring mosaic tile craft that veers away from the traditional mosaics. It is very important that one must be familiar with the proper materials, tools and adhesives so that the projects can be completed successfully. One must be essentially prepared before beginning the project. One must set up the working area, and make sure that it has all the necessities including materials and supplies and review the steps for your project.
One must be able to create a lot of fun when there is everything that you need accessible and don't have to run around looking for the supplies. It is also useful to keep a workbook handy just in case you need some help. Various types of materials are used in order to make the mosaic tile craft and are referred to as tessarae. There is an excellent variety of commercial glass; tile and ceramic tesserae at are available today.
All these materials can be used for making inspiring mosaic tile craft with mixed media elements. One must feel free to experiment with the various types of materials. There are many mosaic tile craft patterns that have been created out of flattened bottle caps and recycled clothing tags. When making mixed media mosaic tile craft designs there are an endless possibility of materials.
In order to assemble the mosaic it is important to attach the tesserae that you select on the base surface. It is important that you make use of the right adhesive and correct preparation for the mosaic tile craft pattern. It is possible to make almost anything possible on a suitable surface of mosaic. A smooth and flat surface is the easiest to work with but little preparation can transform surfaces with various textures into the perfect bases for your mosaics.
It is also essential that you have the correct tools and supplies when making mosaic artwork. Having all the correct tools on hand will only make your life easier and your artwork better. Therefore one must gather all tools and materials before you begin working on the mosaic tile craft, so that they are easily accessible while you are working. You may not want to be stuck in the middle of the project searching for missing tools.
Tile nippers, wheeled tile nippers, ring blade saws, glass scorers, running pliers are some of the tools that supplies that you will need when you begin making your mosaic tile craft. That you don't have lying around in your house can be easily found at the local home supply of craft store.
Botkier Howard Satchel Buy Now Kreg Router Tables Quick Rowenta Professional Iron Reviews
Wednesday, November 23, 2011
Creating the Perfect Halloween Pumpkin Decorations - 7 Easy Tips
Are you making a pumpkin lantern or other pumpkin decorations this Halloween? If so, here are seven tips to make this year's Halloween pumpkin your best ever!
1. Plan your design carefully
It's important to decide what type of design you're going to use in advance. The design will determine the size, shape and colour of the pumpkin you select. Also consider if your pumpkin decoration will be a standalone centerpiece, or if you will have several pumpkins sitting together. If you just want the one, it will need to be large enough to make an impact and look good from all angles. If you're planning a display with several pumpkins, select pumpkins which will look good together, perhaps in a variety of shapes and sizes.
2. Make sure the pumpkin is in good condition
To ensure your Halloween pumpkin lasts as long as possible, buy one that is ripe and in excellent condition. Check for bruises, soft spots, mould, mildew etc, and remember that the flesh should be firm, and the stem should not look dried out. Pumpkins with smooth surfaces are easier to work with (although irregularities can add interesting aspects to your design too), and you might prefer to select one that is uniform in colour. After buying, be careful not to drop your pumpkin, and don't carry it around by the stem.
3. Choose a pumpkin that's the right size and shape
It's important to choose the right pumpkin for your planned design. Larger pumpkins are best for more complex designs, and smaller ones for simpler designs. A round pumpkin might work better with a scary face, whereas a tall pumpkin is preferable for an elongated design like a sitting cat or a ghost. If you're using a pre-made template, medium-sized pumpkins are usually best, unless otherwise specified.
4. Consider painting your pumpkin
Painted pumpkins are more unusual than the carved variety, but they last longer, and can be extremely eye-catching and attractive. Don't worry if you think you can't paint - it's really very easy! You can also enhance your carved pumpkin with a bit of paint. Check out my site (url below) for more information about easy pumpkin painting.
5. Use the right tools
Selecting the right tools for the job can make carving your pumpkin a lot easier. If you're really serious about pumpkin carving, you can buy special saws and other specialist tools designed just for carving pumpkins. These can make the carving process quicker, and are especially good if you're doing the more complex designs. But you can also get excellent results with the everyday tools you probably already have around the house, such as thin, long-bladed knives for cutting the flesh, spoons for scooping it out and a pen or pencil for drawing the design onto the pumpkin's surface. Knives should be sharp, and sharper knives are actually safer to use, as less force is needed.
6. Add a few extras
After carving or painting your pumpkin, you can dress it up further by adding extras like glitter, sequins, beads, wigs, hats, false noses etc. Just be careful about using flammable materials if you're adding a candle to your pumpkin to make a lantern.
7. Prolong the life of your pumpkin
Carved pumpkins usually tend to deteriorate within a few days, but you can help to prolong the life of your pumpkin by smearing the exposed surfaces with petroleum jelly. You can also buy special sprays designed for this purpose. Covering your carved pumpkin with cling film and keeping it in the fridge when not on display can also help. Bear in mind that painted pumpkins last longer than carved ones, so you might want to consider adding a painted pumpkin or two to your Halloween decorations for extra longevity and variety.
Bear these points in mind, and you're sure to create a beautiful, long-lasting pumpkin decoration this Halloween!
Propane Gas Smokers Purchase Saving Keurig K Cups Decaf Best Buy Fisher Price Papasan Infant Seat
Tuesday, November 8, 2011
Antique Saws Can Be a Work of Art
People will hang just about anything on their walls, from moose heads to beer signs. However, a select few have found beauty in antique saws and tools. These can make a beautiful addition to any den or workshop décor.
There are a few kinds of antique saws that accentuate a room with very little effort on the part of the owner. This is because they need little to no restoration work whatsoever. The inherent beauty in these tools is in the fact that they are old and a little rust or a few cracks in the handle gives them character. It is a well-known fact that an incorrect attempt to restore an antique to its original condition actually reduces its value rather than increasing it.
Either the two-man saw or wooden handled bow saw looks great on the wall of any cabin or den. They remind people of a different time when electricity and power tools were simply a dream and men built their own homes. The rustic look in any recreation room or den may be accented by adding one or more antique saws and other old hand tools.
Antique tools are a great conversation piece, particularly if they were handed down from one generation to the next. Tools like these have many stories attached to them that can help the rest of the family learn about their ancestors. A two-man saw that was used to clear the land the family home stands on, or a fine blade-trimming saw that came over from Europe with relatives that were carpenters, can be a lasting family heirloom.
Antique saws are one of the more unique wall decorations found in homes today. These can convey many feelings, particularly if they represent some family history. Look around in the tool shed or barn and you may be pleasantly surprised at what is found...
Action Toys Broken Arrow Grand Sale Toro Pole Saw Get It Now!
Subscribe to:
Posts (Atom)
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |